DC Caliper Hose Set for Aftermarket Brakes

DC Caliper Hose Set for Aftermarket BrakesThis set of 4 caliper hoses for your 94 01 DC Integra is specifically designed for those of you using aftermarket calipers with an 1 8" NPT inlet. Your factory calipers used a banjo style inlet connection. If you have upgraded to aftermarket calipers (such as Wilwood) you will likely have an 1 8" NPT inlet. If this is the case, then it will leave you wondering how to plumb your caliper hoses to your new upgraded calipers. This kit is the answer. With

This set of 4 caliper hoses for your 94-01 DC Integra is specifically designed for those of you using aftermarket calipers with an 1/8" NPT inlet. 

Your factory calipers used a banjo style inlet connection. If you have upgraded to aftermarket calipers (such as Wilwood) you will likely have an 1/8" NPT inlet. If this is the case, then it will leave you wondering how to plumb your caliper hoses to your new upgraded calipers. This kit is the answer. With this kit you will receive a set of four caliper hoses with the factory style hose end on the chassis side and a 3AN hose end on the caliper side. We also include 3AN to 1/8" NPT angled adapter fittings for threading into your aftermarket caliper inlet.

Whether you are running a set of front drag brakes, big brake kit, aftermarket rear trailing arm kit, etc. this kit can be a great problem solver!

If you later decide to switch back to a banjo style caliper you can purchase a 3AN to banjo adapter fitting set to retain use of these caliper hoses. Email [email protected] for any questions.

All brake line kits are available in your choice of color combo and are made to order accordingly.

Please allow 1-3 days for shipment. Brake hoses consist of a Teflon inner liner followed by a stainless braided covering and then finished with a poly outer coating for abrasion resistance to painted surfaces.