Pay in installments of $35.43 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 14 - Aug 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
DrayTek V166-K Vigor 166 G.FAST and VDSL2 Ethernet Modem/BridgeDraytek Vigor V166 K Key Features G. fast (Ultrafast Fibre) & VDSL2 (Superfast Fibre) to Ethernet Modem Bridges DSL to your Router or Firewall Pre Configured to work with most ISPs IPv6 and IPv4 Compatible Compatible with IPTV and Video on Demand (YouView, Sky Q) 2 Gigabit LAN Ports Optional VigorCare Available G. Fast & VDSL2 35b Capable Up to 330mbps download and 50mbps upload with G. Fast technology. Can be used with all the latest DSL standards,
Draytek Vigor V166-K Key FeaturesG.fast (Ultrafast Fibre) & VDSL2 (Superfast Fibre) to Ethernet Modem
Bridges DSL to your Router or Firewall
Pre-Configured to work with most ISPs
IPv6 and IPv4 Compatible
Compatible with IPTV and Video on Demand (YouView, Sky Q)
2 Gigabit LAN Ports
Optional VigorCare Available
G.Fast & VDSL2 35b Capable
Up to 330mbps download and 50mbps upload with G.Fast technology. Can be used with all the latest DSL standards, with Vectoring and 35b SuperVectoring.
Two Gigabit LAN Ports
Connect two devices to the Vigor 166 with 2 Gigabit (10/100/1000Mbps) LAN ports. No need to disconnect Ethernet WAN to check connectivity.
Add DSL connectivity to any Router
Ideal Partner device for DrayTek dual-WAN products or any other vendor’s Ethernet WAN firewall. Reports DSL Line Status on DrayTek Vigor routers.
No Setup Needed
Works as a modem with most ISPs, straight out of the box. Pre Configured to work with most UK ISPs. Just set the username and password on your router.
Full-Bridge Modem and More
Two operation modes for the Vigor 166 allow it to operate as a fully bridged DSL to Ethernet Modem, or as a mini Router with NAT DMZ Host.
Wall or Shelf Mountable
Can be installed securely on a wall or shelf with screw fixings to hold it in place. Mounting kit included.
Technical Specifications
Physical Interfaces
2 x Gigabit Ethernet (1000Mb/s) Ports
WAN1 : G.Fast/VDSL - RJ-11
Recessed Factory Reset button
Performance
Max G.fast Sync Rate: 1.3Gb/s (dependent on ISP & Exchange equipment)
Max VDSL2 35b Sync Rate: 300Mb/s
Max VDSL2 17a Sync Rate: 100Mb/s
Max ADSL2+ Sync Rate: 20Mb/s
NAT Performance:
- Firewall: Up to 700Mb/s (940Mb/s with Hardware Acceleration)
- NAT Sessions: 10,000
WAN Features
Pre-Configured with OpenReach network VLAN tag 101
WAN1 Service & Customer (double-tag) VLAN support
Maximum MTU 1508
G.Fast & DSL Compatibility
BT Infinity Option 1 & Option 2 Compatible
Compliant with Openreach SIN 527 & SIN 498
Auto Detection of G.Fast and VDSL line modes
Support for G.INP & Vectoring
G.Fast Standards:
- ITU-T G.9700, G.9701 G.Fast
- Profile: 106MHz
VDSL Standards:
- ITU-T G.993.1 VDSL
- ITU-T G.993.2, G.997.1 VDSL2
- Band Plan: G.998, G.997
- Annex A, Annex B, Annex C
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 35b
- OLR, UPBO, DPBO Supported
- US0 Supported
- Loop Diagnostic Mode
- DSL Forum WT-114
ATM Protocols:
- RFC-2684/RFC-1483 Multiple Protocol over AAL5
- RFC-2516 PPP over Ethernet
- RFC-2364 PPP over AAL5
- Support for RFC4638 for MTU up to 1500
Network Features
DSL Status Display with DrayTek Vigor routers
Management Interfaces
Web-Based User Interface (HTTP / HTTPS)
CLI ( Command Line Interface ) via Web Console, Telnet or SSH
Configuration Backup / Restore
Firmware Upgrade via Web Interface, TFTP
Router mode Firewall & NAT Features
DMZ Host
NAT Port Forwarding
NAT Port Redirection
ALG (Application Layer Gateway): SIP, RTSP, FTP, H.323
VPN Pass-Through: PPTP, L2TP, IPsec
Object-based IPv4 / IPv6 Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection ) with FlowTrack Mechanism
DoS / DDoS Protection
IP Address Anti-spoofing
Bind IP to MAC Address
DHCP Server
Static Route & IP Routed Subnet
URL Keyword Filtering
Dynamic DNS
IGMP Proxy
Router mode WAN Protocols
DHCP Client
Static IP
PPPoE / PPPoA
IPv6: PPP, DHCPv6, Static IPv6, TSPC, AICCU, 6rd, 6in4 StaticTunnel
Multi-PVC/VLAN virtual WAN interfaces for Management / IPTVservices
Router mode Management Features
Syslog
SNMP v2 & v3
VigorACS Management
TR-069
TR-104
NTP Client
Built-in Diagnostic Function (ping, traceroute)
Operating Requirements
Wall Mountable
Operating Temperature : 0 °C ~ 45 °C
Storage Temperature : -25 °C ~ 70 °C
Humidity 10% ~ 90% (non-condensing)
Power Consumption: 6.6 Watt Max.
Dimensions:
- Length: 181mm
- Width: 125mm
- Height: 40mm
Weight: 280g
Operating Power: DC 12V 1A (via external PSU, supplied)
Power Requirements : 220-240VAC
Box Contents
Vigor 166 Modem
Quick Start Guide
RJ-11 DSL Cable
Cat-5e RJ-45 Cable
Screws & wall plugs for wall mounting
DC 12V PSU
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 5
I'd give 10 stars if I could
Holy cow! This is it!
For YEARS I've been looking for a product that would align the bezels on my monitors. I found this product by scrolling through reels and then found the link to Amazon. The price was steep and I was hesitant, but I took the gamble and I'm so glad I did.
Installation is slightly confusing, and you really want to know how this works before you adhere it to any surface. I'll break it down for you:
Align your monitors flat next to each other. Attach one side with the adhesive, then snap the other side on with the magnet. Peel that adhesive strip and lay it on your second monitor so that they are even. Repeat for the bottom. Twist the U shape up for the left, down for the right. Adjust your angle and then lock them by putting the U shape back to how it was. That's it.
The stability on these simple magnets is excellent. I went from a wobbly mount to locked in and only moving when I want it to. I'm so happy this product exists.
That's German engineering for you. 💪💪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
★★★★★ 4
Works well...but the price!
I ordered two sets to connect 3 monitors together for a workstation at my job. These are well designed and the magnets are pretty strong. Installation is easy and it holds the alignment well.
The only issue is the price. For what it is, the price is quite high. The value proposition would be much higher for those who need to be able to not have them aligned from time to time, such as rotating one around for others to see in an office. But if don't need to do this and just want alignment, there are much cheaper options.
If you want to go the cheapest DIY route and it won't be seen, some popsicle sticks with two sided tape works well. You can crack them in the middle to act as a hinge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 5, 2026
★★★★★ 5
Awesome product only thing that worked
I originally thought the Screen Buddy was overpriced, but after spending hundreds of dollars trying to perfectly align my monitors for sim racing, this is genuinely the only thing that has actually worked properly.
Triple monitor alignment is one of the most frustrating parts of building a sim rig, especially with monitor arms constantly moving or sagging. This finally made everything line up the way I wanted.
Expensive? Maybe. Worth it after all the headaches? Absolutely. Great job.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 1
Doesn't stick
The adhesive tape kept coming off. I cleaned and followed the installation instructions, but it still kept coming off. Wouldn't recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
★★★★★ 5
Works Great, Very happy customer
I’ve tried a few different ways to connect and manage dual monitors, and the Screen Buddy Dual Monitor Connector is easily one of the most straightforward and reliable solutions I’ve used. Setup was quick—no confusing instructions or extra headaches
Performance-wise, it’s been rock solid. The connection stays stable and even when I bumped the monitors once, and they disconnected, it was a quick push and they clicked right back together.
Build quality feels solid and durable, not flimsy like some cheaper connectors. It’s clearly designed with everyday users in mind, whether you’re working, gaming, or multitasking across multiple apps.
Overall, it delivers exactly what it promises: a simple, dependable way to keep your screens connected with no gaps or one being too high or too low. Definitely worth it if you want a clean, hassle-free dual monitor setup.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026