Pay in installments of $78.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours Β· Estimated delivery Aug 17 - Aug 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Aerpro FP9750PB INSTALL KIT TO SUIT BA/BFINSTALL KIT TO SUIT BA BF Model: FP9750PB Brand: AERPRO Category: HEADUNIT TOTAL SOLUTION KITS Type: FACIA AND SWC KITS Complete a full aftermarket headunit installation in your Ford Falcon BA BF or Territory SX SY, single and dual zone variants, from start to finish with this Aerpro vehicle specific headunit installation kit. Containing everything required for the perfect upgrade in one box, this kit includes: a piano black facia kit with built in H
INSTALL KIT TO SUIT BA/BF
Model: FP9750PB
Brand: AERPRO
Category: HEADUNIT TOTAL SOLUTION KITS
Type: FACIA AND SWC KITS
Complete a full aftermarket headunit installation in your Ford Falcon BA-BF or Territory SX-SY, single and dual zone variants, from start to finish with this Aerpro vehicle specific headunit installation kit. Containing everything required for the perfect upgrade in one box, this kit includes: a piano black facia kit with built in H-VAC controller and steering wheel control interface, mounting kit, vehicle specific wiring loom, video in/out loom and universal SWC patch lead. To make the installation process even easier, simply add an Aerpro APP9 harness & patch lead (sold separately) which will connect from the aftermarket headunit directly into the vehicle harness supplied in this kit. The facia kit has integrated buttons for HVAC control and various vehicle settings, which will display on the aftermarket AV headunit when in use. It also has dual USB pass through ports which can be connected to the USB inputs on the back of the aftermarket headunit (if available). If the aftermarket headunit requires handbrake, reverse or speed pulse connection, these the outputs can be found on the main wiring loom included in the kit. Due to the design and features of this installation kit, only aftermarket double din mechless shallow mount AV headunits with RCA camera input and steering wheel control capability are recommended for installation. Vehicles with OEM reverse sensors will require additional parts to retain this feature, AP1WAMP audio amplifier and CBXS extension speaker, sold separately.
Key Features:
- Kit includes all the parts required to complete an installation of an aftermarket headunit conveniently in one box
- Suitable for double din aftermarket AV headunit installation
- Mechless shallow mount headunits recommended for easier installation due to their mounting depth
- High quality piano black finish on facia kit to suit the style of the vehicle interior
- Retains steering wheel control functionality when connected to compatible aftermarket headunits
- Includes integrated buttons for adjusting climate control and various vehicle settings
- Climate Control and Vehicle Information display on aftermarket AV headunit
- Dual USB pass through ports for connecting to the rear ports on the aftermarket headunit
- Provides output feeds for reverse, park brake and speed pulse
- Suitable for vehicles with single or dual zone climate control
- To simplify installation, this kit is compatible with Aerpro APP9 aftermarket headunit harness adapters
Specifications:
- APPLICATION: DOUBLE DIN
- COLOUR: PIANO BLACK
- INCLUSIONS:
- DOUBLE DIN FACIA KIT
- MOUNTING BRACKETS AND HARDWARE
- VEHICLE SPECIFIC WIRING LOOM
- VIDEO IN/OUT LEAD
- UNIVERSAL SWC PATCH LEAD
- NOTES:
- Total Installation Kits can vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
- Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
- Mechless shallow mount headunits recommended for easier installation due to their mounting depth.
- This kit is designed for aftermarket AV double din headunits with an RCA camera input.
- Dual USB ports are pass through only, to operate they must be connected to USB ports on the rear of the aftermarket headunit (if available).
- Factory reverse camera retention is not supported but can be hard wired.
- Vehicles with OEM reverse sensors will require additional parts sold separately to retain reversing tone, Aerpro AP1WAMP audio amplifier & CBXS extension speaker.
- Headunit ISO harness not included in the kit. Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (sold separately).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 β
β
β
β
β
Based on 29 reviews
Sort
Product Reviews
β
β
β
β
β
4
Expensive, but nice
Style: AVR-X4800H
I previously owned a Denon AVR-2808ci since 2008. That model's remote control didn't work well, and all controls were unnecessarily convoluted, so I was hesitant to buy another Denon. The thing that made me give them another chance is that the sound quality was nice, and I was hoping their engineers learned from their mistakes. I'm glad I gave them the chance.
This new model, the AVR-X4800H, also has excellent sound quality; however, unlike the old one I had, the controls on both the receiver itself, and especially on the remote control, are significantly improved. The controls are intuitive, and everything works perfectly.
That alone made me happy with the purchase; however, the ability to run 4k @ 120 hz for video gaming, and with extra HDMI ports they have here, all added to that value quite a bit. Then, in addition to that, the old model I had ran super hot. In fact, so hot, from just basic usage, it fried itself three different times in the span of a couple weeks (during the winter time), and it kept being repaired under warranty, until they replaced the top grate with one that allows more ventilation. However, this new model doesn't appear to suffer from that same issue. It gets pretty warm, but nowhere near what the old one did -- and I'm using the same Bose Surround Sound system with the new one.
That said, as a precaution, I went ahead and ordered an AC Infinity AirCom to put on top of it, to assist with cooling/ventilation, which has worked wonderfully as well. No the tempts on this Denon AVR have never gone above 87 deg, even on a warm room on the third floor during the late spring / summer time.
The other hesitancy I had was the price tag. I only purchased it because it was on a "25% discount", from $2500 down to around $1850. Granted, it was similar when I purchased the other one 15 years ago, but it's just an awful lot of money, in my humble opinion. I would say it was borderline on whether I would buy it for this amount, and if it went up at all, I wouldn't have purchased it. I may not purchase it again for this price, especially if I have one already that is working well -- it was only the wonky one that I already owned, that I just wanted to get rid of, that put more pressure to give them one more chance. With a working device, I probably wouldn't pay these prices again. But, if it were a few hundred dollars cheaper, then I probably would buy it again.
Hopefully this helps someone. It's a great device, just a bit expensive. And, if you get it, I would still recommend getting a top cooling fan for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 13, 2024
β
β
β
β
β
5
Solid Next-Generation AVR.
Style: AVR-X2800H
I bought this for my 2.1 system used for TV (4K with 120 Hz), movies, video games (4K with 120 Hz), turntable, and digital audio. I have previously used Denon, Marantz, and NAD AVRs. I was using an old NAD without HDMI, and I really wanted everything to synch up.
I tried out a stereo receiver since I am only running a 2.1, but I didn't mesh for me. It was fine, but I felt it was lacking especially around multi-channel audio and the lack of an LFE output for the sub.
The 2800H was very intuitive and easy to set up right out of the box. Hooked up to a TV, it runs through everything step-by-step. After the initial setup, I downloaded and ran a firmware update. When I finally got to use my ears, the sound was already superior to what I had from the mid-2000s 60-watt-per-channel NAD AVR with an external Bluetooth/DAC and PCM cable from the TV AND the brand-new, 2023 model HDMI-equipped stereo receiver (that cost me more than the 2800H). After running Audyssey, the sound only got better. Then, I set up my 2 front speakers on a bi-amp setting, utilizing two of my unused channels to drive my woofer and tweeter with discrete power sources.
The eARC and settings makes turning on my TV, PS5, and AVR easier and quicker. I enjoy the fact that I can use any remote to fix the volume so there is always a remote close when we need a quick mute or change in the volume.
I find the HEOS app to be a little clunky, but I am loving it anyway. I can run high-definition audio through streaming, which is a huge improvement from using Apple Airplay 2 or Bluetooth. It also lets me talk on the phone, send and receive messages, etc. without interrupting the music.
Right now, I am still tweaking my settings, but I can definitely say that the sound is really good. Have I heard better? Sure. This isn't an 11-channel receiver with Dirac, a 200 watt-per-channel, high-end "audiophile"-grade component, or a tube amp. It is best at multi-channel audio and does really well for music, especially with a good set of speakers and quality sub with parametric EQ.
My speakers have are low sensitivity (84dB), and the 2800H puts out enough grunt to listen give nuance and life to music in listening position, to bump the music to listen in my kitchen two rooms over, or watch at theater-level volume in my medium-sized living room with 8-foot ceilings. This thing is getting daily use, and it is more than enough to get the job done in style. For what I need, the 2800H is spot on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 9, 2023
β
β
β
β
β
5
High-Quality Wire Thatβs Worth Every Foot
Size: 14/2 AWG-200 FT, Color: White
The GEARit 14 Gauge Speaker Wire (200 ft, CL2 rated) has been a great addition to my home audio setup. The 14 gauge thickness feels solid and gives me confidence that Iβm getting good signal transfer without unnecessary loss, even over long runs.
The CL2 rating is a big plus β itβs reassuring to know this cable is safe and approved for in-wall installation if I ever decide to run speakers through the walls rather than on the surface.
What I like most:
Flexible yet strong β easy to pull through studs and around corners
Clear polarity markings β no guesswork when wiring speakers
Smooth insulation β doesnβt snag or tangle while measuring and cutting
Good value for 200 ft β plenty to cover multiple rooms or channels
Whether youβre doing a DIY install or upgrading your audio system, this speaker wire delivers solid performance and peace of mind. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2026
β
β
β
β
β
5
Quality wires
Size: 14/2 AWG-200 FT, Color: White
My speakers π are working much better and the sound is a lot better
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
β
β
β
β
β
5
Good product
Size: 14/2 AWG-200 FT, Color: White
Exactly what I was looking for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 27, 2026
recommand products
Bejou USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Beebe USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Bedminster USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Belington USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00
Belden USA Newspapers Vector Illustration | Editable SVG, AI, EPS, PDF & PNG | City Vectors
11.00