Pay in installments of $13.61 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours ยท Estimated delivery Aug 9 - Aug 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
LR2K0301Main Range TeSys Product name TeSys LRK Product or component type Differential thermal overload relay Device short name LR2K Relay application Motor protection Product compatibility LP4K LC1K LP1K LC7K Network type DC AC Thermal overload class Class 10A conforming to IEC 60947 4 1 Thermal protection adjustment range 0. 110. 16 A [Ui] rated insulation voltage Power circuit: 690 V conforming to BS 4941 Power circuit: 690 V conforming to IEC 60947 Power
Main
| Range | TeSys |
| Product name | TeSys LRK |
| Product or component type | Differential thermal overload relay |
| Device short name | LR2K |
| Relay application | Motor protection |
| Product compatibility | LP4K LC1K LP1K LC7K |
| Network type | DC AC |
| Thermal overload class | Class 10A conforming to IEC 60947-4-1 |
| Thermal protection adjustment range | 0.11โฆ0.16 A |
| [Ui] rated insulation voltage | Power circuit: 690 V conforming to BS 4941 Power circuit: 690 V conforming to IEC 60947 Power circuit: 750 V conforming to VDE 0110 group C Power circuit: 600 V conforming to CSA C22.2 No 14 |
Complementary
| Network frequency | <= 400 Hz |
| Mounting support | Under contactor Plate, with specific accessories Rail, with specific accessories |
| Auxiliary contact composition | 1 NO + 1 NC |
| [Ith] conventional free air thermal current | 6 A for signalling circuit |
| [Ue] rated operational voltage | <= 690 V for power circuit 690 V AC AC-15 for signalling circuit 250 V DC DC-13 for signalling circuit |
| Associated fuse rating | 6 A gG for signalling circuit conforming to VDE 0660 6 A gG for signalling circuit conforming to IEC 60947 |
| [Uimp] rated impulse withstand voltage | 6 kV |
| Power dissipation per pole | 2 W |
| Phase failure sensitivity | Yes conforming to IEC 60947-4-1 |
| Local signalling | Trip indicator (yellow) |
| Control type | Red push-button: trip test function Blue push-button: stop and manual reset Selector switch: manual or automatic reset |
| Connections - terminals | Screw clamp terminals 1 cable(s) 1.5โฆ4 mmยฒsolid Screw clamp terminals 2 cable(s) 1.5โฆ4 mmยฒsolid Screw clamp terminals 1 cable(s) 0.75โฆ4 mmยฒflexible without cable end Screw clamp terminals 2 cable(s) 0.75โฆ4 mmยฒflexible without cable end Screw clamp terminals 1 cable(s) 0.34โฆ2.5 mmยฒflexible with cable end Screw clamp terminals 2 cable(s) 0.34โฆ1.5 mmยฒflexible with cable end |
| Tightening torque | 1.3 N.m - on screw clamp terminals - with screwdriver Philips No 2 1.3 N.m - on screw clamp terminals - with screwdriver flat ร 6 mm |
| Height | 58 mm |
| Width | 45 mm |
| Depth | 65 mm |
| Net weight | 0.145 kg |
Environment
| Standards | VDE 0660 IEC 60947 NF C 63-650 BS 4941 |
| Product certifications | CSA UL |
| Protective treatment | TC conforming to IEC 60068 TC conforming to DIN 50016 |
| IP degree of protection | IP2x conforming to IEC 60529 |
| Ambient air temperature for operation | -20โฆ55 ยฐC without derating conforming to IEC 60947 -30โฆ60 ยฐC with derating conforming to IEC 60947 |
| Ambient air temperature for storage | -40โฆ70 ยฐC |
| Operating altitude | 2000 m without derating |
| Fire resistance | 850 ยฐC conforming to IEC 60695-2-1 |
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Mechanical robustness | Shocks NO contact: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks NC contact: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations NO contact: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations NC contact: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
Offer Sustainability
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Compliant EU RoHS Declaration |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 โ
โ
โ
โ
โ
Based on 13 reviews
Sort
Product Reviews
โ
โ
โ
โ
โ
5
Easily supports a pair of 26" displays
Size: Dual, Style: Free-Standing
I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure.
It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them.
Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post.
Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms.
Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like.
The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault.
I recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
โ
โ
โ
โ
โ
5
It's simple, it works, & its price makes for a good deal
Size: Single, Style: Free-Standing
I needed a stand for a 27" VIZIO TV that had been wall-mounted for a few years, & (?) the original stand must've got the toss long ago... It's hard to say...
I found this stand on Amazon priced right, plus it had a coupon attached to the listing. I scrolled down & I saw a "newer model" of the same product was available, so I was initially hesitant.
But, looking at the product pictures, reading the description, & scanning through some of the reviews, then the same with the "newer model" โ the only difference I could see was mostly aesthetic (it also appears to have a desk mount included, which wouldn't have worked for me regardless of its purposeโeither for conversion to a desk stand-off mount, or to further secure the stand....?)
Eventually, I just thought "....it's a stand with a VESA mount; how do you **** that up...?" And I really couldn't think of anything...even if the VESA bracket was milled not to spec (it is milled to spec), I could
have still made it work....(?) So, I made the purchase, received it, & 9-10 screws later, the TV had a stand. & I'm guessing a much more versatile stand than the original. The bracket that attaches the stand to the VESA mount can lower or raise the TV quite a bit. Even in it's highest position, it's still retains its sturdiness & remains stable. The baseplate has a decent amount of weight, and its overall design is well balanced to favor stability (to a tolerance; e.g., an old CRT monitor just isn't going to work).
The stand is literally 4 basic piecesโthe VESA bracket, an articulating bracket, a metal tube, & a metal baseplate. If you have a standard phillips screwdriver, then the stand is easy to assemble. If you have any experience with TV mounts, or TV stands, then it assembles in less than 15 minutes.
Given what you get for the price, the ease of assembly, the added versatility, if you need a stand for a screen within the manufacturer's specific tolerances, then I would absolutely recommend this stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 19, 2021
โ
โ
โ
โ
โ
5
Decent Monitor Stand with Some Assembly Required
Size: Single, Style: Free-Standing
This monitor stand works pretty well and is a good value for the price. Itโs sturdy and adjustable, which makes it perfect for a variety of monitors, including my 32-inch curved Samsung. The assembly is straightforward if you have a Phillips screwdriver and something to tighten bolts, like a wrench. Itโs solid once itโs put together and holds my monitor securely. The phone holder could use some improvement. It doesn't adjust to face me directly, which is a bit annoying. The stand itself is great for saving desk space and providing better ergonomics, but it can be a bit of a hassle to assemble if youโre not handy with tools. Overall, a good buy if you need a reliable monitor stand.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2024
โ
โ
โ
โ
โ
3
Works, Good product, but wouldn't recommend for specifically 3 27inch screens.
Size: Triple, Style: Free-Standing
I purchased this stand to have 3 27inch 2560x1440 monitors, with the side ones angled towards me in a typical 3-monitor setup often seen being used by racing or aviation simulator guys. This stand's arms for the two side monitors are not long enough to have said monitors angled more than 5 to 8 degrees meaning they are forced to be completely linear which is incredibly awkward to try to use because you can barely see or use the screen space on the far edges.
๐๐ข๐ญ๐ก ๐ญ๐ก๐๐ฌ๐ ๐ฌ๐ข๐ณ๐ ๐ฌ๐๐ซ๐๐๐ง๐ฌ, ๐ญ๐ก๐ ๐จ๐ง๐ฅ๐ฒ ๐ฐ๐๐ฒ ๐ญ๐จ ๐ก๐๐ฏ๐ ๐๐ฏ๐๐ง ๐จ๐ง๐ ๐๐ญ ๐๐ง ๐๐๐๐ช๐ฎ๐๐ญ๐ ๐๐ง๐ ๐ฅ๐ ๐๐จ๐ซ๐๐๐ฌ ๐ญ๐ก๐ ๐จ๐ญ๐ก๐๐ซ ๐ฆ๐จ๐ง๐ข๐ญ๐จ๐ซ ๐ญ๐จ ๐๐ ๐ข๐ง ๐ฉ๐จ๐ซ๐ญ๐ซ๐๐ข๐ญ ๐ฆ๐จ๐๐, ๐ค๐ข๐ง๐ ๐จ๐ ๐ฆ๐๐ฌ๐ฌ๐ข๐ง๐ ๐ฎ๐ฉ ๐ญ๐ก๐ ๐ฐ๐ก๐จ๐ฅ๐ ๐ฉ๐จ๐ข๐ง๐ญ ๐จ๐ ๐๐ฎ๐ฒ๐ข๐ง๐ ๐ญ๐ก๐ข๐ฌ. The product description should not say it can hold 3 27 inch screens because the amount of struggling I had to do to get it to be acceptable was ridiculous.
The stand is... not heavy enough to safely hold monitors of this size either, and additional weight was required ( 2 10lb dumbbells in my case ) configuring the height of your monitors with this stand can be dangerous as well as they could fall down the central post so you have to be extremely careful, but, it is pretty easy other than that.
It is a great option if you don't have a desk with an edge for typical stands ( I don't. ) You can place the stand anywhere, and you don't have to drill through your desk if you really don't want to. The cable clips are a very nice included bonus, and they sent me a replacement without any hassle when I totally effed up my first attempt at setup.
But, I would have shopped harder and got something else if I knew all this prior all the same. Maybe even bought a gigantic curved screen instead.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2025
โ
โ
โ
โ
โ
5
Love this cord.
Size: 10 Ft, Color: White
Love how many outlets etc this cord has. Its the perfect next to bed outlet extender I have had.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026